Expert Analysis: Strogino Moskva vs FK Ryazan

The upcoming match between Strogino Moskva and FK Ryazan on August 3, 2025, presents intriguing betting opportunities based on the available data. Both teams have shown varying levels of offensive and defensive capabilities throughout the season, which are reflected in the betting odds. With an average total of 3.08 goals expected in the game, there is a significant chance for goal-rich action, yet the odds suggest a cautious approach to betting on high-scoring outcomes.

Betting Analysis: Both Teams Not To Score In 2nd Half

The odds for both teams not to score in the second half are set at 89.30, indicating a strong likelihood that one or both teams will remain defensively solid after halftime. This suggests that while there might be early goals, the second half could see both sides focusing more on maintaining their leads or securing defensive stability.

Betting Analysis: Both Teams Not To Score In 1st Half

With odds of 82.40, it is plausible that both teams might adopt a cautious approach in the first half, leading to a goalless start. This could be due to tactical setups or weather conditions affecting play, making it a viable option for those looking to bet on a slower start.

Betting Analysis: Both Teams Not To Score

The combined probability for neither team scoring throughout the match stands at 75.80. This reflects a scenario where both teams might struggle offensively or prioritize defensive strategies, possibly due to recent form or tactical matchups.

Betting Analysis: Over 0.5 Goals HT

The odds for over 0.5 goals by halftime are relatively low at 72.90, suggesting that while some scoring is expected early on, it might not be significant enough to heavily influence the match outcome.

Betting Analysis: Away Team To Win

FK Ryazan is favored to win with odds of 68.50. This indicates confidence in their ability to exploit Strogino Moskva’s potential weaknesses, possibly due to recent performances or home advantage dynamics.

Betting Analysis: Over 1.5 Goals

The odds for over 1.5 goals in the match are set at 66.10, suggesting a moderate expectation of multiple goals being scored. This reflects the attacking potential of both teams and the likelihood of an open game.

Betting Analysis: Away Team Not To Score In 1st Half

With odds of 57.20, there is a notable chance that FK Ryazan might not score in the first half, possibly due to Strogino Moskva’s strong defensive setup or early-game strategies.

Betting Analysis: Away Team To Score In 2nd Half

The probability for FK Ryazan scoring in the second half is indicated by odds of 58.40, suggesting they may come out stronger after halftime adjustments or exploiting any lapses in Strogino Moskva’s defense.

Betting Analysis: Over 2.5 Goals

The odds for over 2.5 goals in the match are at a moderate level of 53.70, indicating that while high-scoring action is possible, it is not guaranteed and depends heavily on both teams’ form and tactics during the game.

Expert Predictions for Match Outcome

spiesman/SP-1/Labs/SP1_Exercise_6/Lab6.tex
documentclass{article}
usepackage{graphicx}
usepackage{listings}
usepackage{color}

lstset{
language=C,
basicstyle=ttfamily,
numbers=left,
numberstyle=tiny,
keywordstyle=color{blue},
commentstyle=color{red},
stringstyle=color{green},
frame=single,
tabsize=4
}

title{SP1 Lab6}
author{Markus Spiesman}
date{today}

begin{document}

maketitle

section*{Task A}

The program reads two numbers from stdin using scanf and prints them out using printf.

In addition it calculates and prints out their sum.

The program does not do any error checking so it can crash if you enter something other than numbers.

The program can be compiled using gcc lab6.c -o lab6 and then run with ./lab6.

For example:

lab6

Enter two numbers:

3

4

You entered:

3

4

Sum:

7

noindent
The program has been tested with different numbers as input.

newpage

lstinputlisting[language=C]{lab6.c}

end{document}spiesman/SP-1/Labs/SP1_Exercise_4/lab4.c
#include

int main()
{
int i;

for (i = -10; i <=10; i++)
{
if (i %3 ==0)
printf("%dn", i);
}

return(0);
}spiesman/SP-1/Labs/SP1_Exercise_7/lab7.c
#include

int main()
{
int input;
int sum =0;

printf(“Enter number:n”);

while(scanf(“%d”, &input) != EOF)
{
sum += input;
printf(“Sum so far is %dn”, sum);
}

return(0);
}#include

int main()
{
int n;
int sum =0;

printf(“Enter number:n”);
scanf(“%d”, &n);

while(n !=0)
{
sum += n;
scanf(“%d”, &n);
}

printf(“Sum is %dn”, sum);

return(0);
}spiesman/SP-1/Labs/SP1_Exercise_3/Lab3.tex
documentclass{article}
usepackage{graphicx}
usepackage{listings}
usepackage{color}

lstset{
language=C,
basicstyle=ttfamily,
numbers=left,
numberstyle=tiny,
keywordstyle=color{blue},
commentstyle=color{red},
stringstyle=color{green},
frame=single,
tabsize=4
}

title{SP1 Lab3}
author{Markus Spiesman}
date{today}

begin{document}

maketitle

section*{Task A}

This program uses loops and printf statements to print out all even numbers from -10 to +10.

It has been tested by running it with gcc lab3.c -o lab3 and then ./lab3.

For example:

lab3

Even numbers from -10 to +10:

-10

-8

-6

-4

-2

0

2

4

6

8

10

noindent
The program can also be compiled using clang lab3.c -o lab3.

noindent
The program has been tested with clang as well as gcc as compiler.

noindent
It has also been tested using valgrind ./lab3 which did not find any memory leaks.

The program has been tested with different compilers and different options like -Wall etc.

noindent
It does not need any special libraries.

The program can be found below:

lstinputlisting[language=C]{lab3.c}

newpage

section*{Task B}

This program uses loops and printf statements to print out all odd numbers from -10 to +10.

It has been tested by running it with gcc lab3.c -o lab3 and then ./lab3.

For example:

lab3

Odd numbers from -10 to +10:

-9

-7

-5

-3

-1

1

3

5

7

9

noindent
The program can also be compiled using clang lab3.c -o lab3.

noindent
The program has been tested with clang as well as gcc as compiler.

noindent
It has also been tested using valgrind ./lab3 which did not find any memory leaks.

The program has been tested with different compilers and different options like -Wall etc.

noindent
It does not need any special libraries.

The program can be found below:

lstinputlisting[language=C]{lab3.c}

end{document}documentclass[a4paper]{article}
%documentclass[a4paper]{scrartcl}

%usepackage[latin9]{inputenc}
%usepackage[T1]{fontenc}
%usepackage[english]{babel}

%opening
%title{TDT4250 Assignment}
%author{Markus Spiesman}

%begin{document}

%maketitle

%section*{Task A}

%This program uses scanf and printf statements to read two numbers from stdin and print them out.

%It has been tested by running it with gcc lab6.c -o lab6 and then ./lab6.

%For example:

%./lab6

%Enter two numbers:

%3

%4

%You entered:

%3

%4

%Sum:

%7

%noindent
%The program can also be compiled using clang lab6.c -o lab6.

%noindent
%The program has been tested with clang as well as gcc as compiler.

%noindent
%It has also been tested using valgrind ./lab6 which did not find any memory leaks.

%The program has been tested with different compilers and different options like -Wall etc.

%noindent
%It does not need any special libraries.

%noindent
%The program can be found below:

%lstinputlisting[language=C]{lab6.c}

%newpage

%section*{Task B}

%A modified version of this program that adds error checking when reading the numbers from stdin is found below.

%It has been tested by running it with gcc lab7.c -o lab7 and then ./lab7.

%For example:

%./lab7

%Enter two numbers:

%f

%syntax error

%did you mean a number?

%.? try again…

%f

%syntax error

%did you mean a number?

%.? try again…

%12

%.? try again…

%demo@demo-desktop:/home/demo$ ./a.out

%Enter two numbers:

%f

%syntax error

%did you mean a number?

%.? try again…

%f

%syntax error

%did you mean a number?

%.? try again…

%f

%syntax error

%did you mean a number?

%.? try again…

%f

%syntax error

%did you mean a number?

%.? try again…

%demo@demo-desktop:/home/demo$

%f

%syntax error

%did you mean a number?

%.? try again…

%f
%syntax error
%did you mean a number?
%.? try again…
%f
%syntax error
%did you mean a number?
%.? try again…
%f
%syntax error
%did you mean a number?
%.? try again…
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%demo@demo-desktop:/home/demo$ ^C

%noindent
%If you enter something other than numbers when prompted for input it will prompt you until you enter something that looks like a number.

%noindent
%A special case exists if you enter anything but digits after entering something that looks like an integer.
%A float value will cause an infinite loop.
%A string will cause the loop to end.
%A special character will cause an infinite loop.
%A blank line will cause an infinite loop.
%A float value like “12.” without trailing digits will cause an infinite loop.
%A float value like “12.” without trailing digits followed by something else will cause an infinite loop.

%noindent
%The program can also be compiled using clang lab7.c -o lab7.

%noindent
%The program has been tested with clang as well as gcc as compiler.

%noindent
%It has also been tested using valgrind ./lab7 which did not find any memory leaks.

%The program has been tested with different compilers and different options like -Wall etc.

%noindent
%It does not need any special libraries.

%noindent
%The program can be found below:

%lstinputlisting[language=C]{lab7.c}

%end{document}
spiesman/SP-1/Labs/SP1_Exercise_8/lab8.c
#include
#include
#include

#define MAX_SIZE_STRING (256)

int main()
{
char *string;
char *substring;
int i;

string = (char*)malloc(MAX_SIZE_STRING * sizeof(char));
substring = (char*)malloc(MAX_SIZE_STRING * sizeof(char));

printf(“Enter string:n”);
fgets(string, MAX_SIZE_STRING, stdin);

printf(“Enter substring:n”);
fgets(substring, MAX_SIZE_STRING, stdin);

if(strstr(string, substring))
printf(“Substring %s found!n”, substring);
else
printf(“Substring %s NOT found!n”, substring);

free(string);
free(substring);

return(0);
}spiesman/SP-1/Labs/SP1_Exercise_9/Lab9.tex
documentclass[a4paper]{article}
%documentclass[a4paper]{scrartcl}

%usepackage[latin9]{inputenc}
%usepackage[T1]{fontenc}
%usepackage[english]{babel}

usepackage{graphicx}
usepackage{listings}
usepackage{xcolor}

definecolor{codegreen}{rgb}{0,0.6,0}
definecolor{codegray}{rgb}{0.5,0.5,0.5}
definecolor{codepurple}{rgb}{0.58,0,0.82}
definecolor{backcolour}{rgb}{0.95,0.95,0.92}

lstdefinestyle {mystyle} {
backgroundcolor=color{backcolour},
commentstyle=color{codegreen},
keywordstyle=color{magenta},
numberstyle=tinycolor{codegray},
stringstyle=color{codepurple},
basicstyle=ttfamily,
breakatwhitespace=false,
breaklines=true,
captionpos=b,
keepspaces=true,
numbers=left,
numbersep=5pt,
showspaces=false,
showstringspaces=false,
showtabs=false,
tabsize=4,
language=C
}

lstset { style=mystyle }

%opening
title{TDT4250 Assignment}
author{Markus Spiesman}

begin{document}

maketitle

section*{textbf{textit{large Task A}}}

This programs reads lines from stdin until EOF (Ctrl-D) using fgets into dynamically allocated memory.
It prints out each line prefixed by its line number.
It prints out the total number of lines at the end.

It has been tested by running it with gcc lab9.c -o lab9 and then ./lab9.
For example:
begin{verbatim}
./lab9
Enter text:
line one
line two
line three

Ctrl+D now!

Lines read:
[01] line one
[02] line two
[03] line three

Number of lines read: [03]
end{verbatim}

It can also be compiled using clang lab9.c -o lab9.
It has also been tested using valgrind ./lab9 which did not find any memory leaks.
The program has been tested with different compilers and different options like -Wall etc.
It does not need any special libraries.
The code listing can be found below:

lstinputlisting[language=C]{../Source/lab9.c}

newpage

section*{textbf{textit{large Task B}}}

This programs reads lines from stdin until EOF (Ctrl-D) using fgets into dynamically allocated memory.
It prints out each line prefixed by its line number.
It reverses each line before printing it out.
It prints out the total number of lines at the end.

It has been tested by running it with gcc lab9b.c -o lab9b and then ./lab9b.
For example:
begin{verbatim}
./lab9b
Enter text:
line one
line two
line three

Ctrl+D now!

Lines read:
[01] enO enil [01]
[02] owt enil [02]
[03] eerht enil [03]

Number of lines read: [03]
end{verbatim}

It can also be compiled using clang lab9b.c -o lab9b.
It has also been tested using valgrind ./lab9b which did not find any memory leaks.
The code listing can be found below:

lstinputlisting[language=C]{../Source/lab9b.c}

end {document}spiesman/SP-1/Labs/SP1_Exercise_8/Lab8.tex

documentclass[a4paper]{article}
%
%%for fancy headers use this instead:
%%https://www.ctan.org/pkg/fancyhdr?lang=en&src=gz&format=zip&pin=r&sel=ctan:/macros/latex/contrib/fancyhdr/fancyhdr.pdf#view=fitH&
%%https://en.wikibooks.org/wiki/LaTeX/F